 |
Surise Solar |
Solar Grid Tied Inverter Maintenance
There are some common problems in solar on grid inverter
Overheating
E electronic components are sensitive to temperatures and solar Inverters are made up same,
and increase in temperatures lead to a
significant drop or reduction in production, or stop production when maximum
operating temperature is reached it is very important that the inverter placed (s)
are well ventilated.
It is highly recommended to regularly check the cooling during the
operational period and to establish that the cooling or ventilation system is
actually operating correctly, addition to this, a number of steps can be taken in order to prevent
excessively high temperatures under knowledgeable person supervision.
Note that this fault can cause
potentially fatal voltages in the conducting parts of the solar system
Therefore not only the brand of the solar inverter that is
important, but also the quality of the components used as well as the use of a
good quality
If you required more information let us know
Therefore an assessment must be made at the solar system design stage compiling propose cooling with sufficient capacity.
Another common error is Isolation fault occurs as a result of a short-circuit between various parts of the circuit, and the solar inverter will then report an “isolation alarm”. The short-circuit is usually the result of a combination of moisture and damage to the sleeve on the cabling, faulty installation, and improper connections.
In the case of an isolation fault, the
solar inverter will stop working completely or continue to work at the minimum isolation level “required”. During this period the inverter is not performing at its maximum capacity. In both cases, production is drop.
In order to detect faults as quickly as possible online monitoring solar system is important.
